Gouda Cheese
Ingredients
10 liter whole cow’s milk
0.25 tsp flora danica or chn-22 culture
5 ml rennet diluted in a quarter of water
0.50 tsp calcium chloride calcium chloride diluted in 1/4 cup cool nonchlorinated water
Method
Warm the milk up to 32º Celsius or 90º Fahrenheit.
Add the
Flora Danica culture
then stir thoroughly.
Cover and leave it to ripen for 15 minutes.
Add the
Calcium Chloride
and stir.
Add in the diluted
Rennet
then leave it to set for 45 minutes to 1 hour or until you have a clean break.
Carefully cut the curd into 1cm cubes
Leave it to rest for an extra 10 minutes
Pour off a third of the whey.
Slowly add 80ºC/175ºF water to the curd until the temperature reaches 33ºC or 92ºF.
Stir continuously then leave it to rest for 10 minutes.
Drain off the whey to the level of the curds.
Slowly add more water at 80ºC or 175ºF to the curds until the temperature reaches 38ºC or 100ºF.
Leave the curd for 30 minutes.
Pour out all remaining whey.
Move the curds into a
cloth lined
Tomme mould
immediately while making sure to handle the curds very gently so as not to break them
Press the curd at 10kgs for about 30 minutes.
Remove, flip and then redress.
Press again at 20kg for 30 minutes.
Remove, flip and then redress.
Press once more at 25kg for 12 hours.
Remove and then unwrap the cheese
Soak the cheese in saturated
brine
for 12 hours and turn the cheese every 3 hours to ensure even coverage. Use
cheese salt
.
Remove the cheese and pat dry.
Air dry at 10°C for 3 weeks.
Wax or Vacuum Seal
Age the cheese at 10º Celsius or 50º Fahrenheit for 3 to 9 months.
Turn cheese about 3 to 4 times a week.